Inspection sticker holder

Colored inspection stickers with a diameter of 15mm for use with our 45x25mm and 54x30mm inspection sticker holders. The next inspection date is indicated by simply sticking the colored inspection sticker onto the free space or sticking over the old inspection sticker.

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: define the contents of the 4 lines (2 large ones with up to 20 characters, 2 small ones with up to 26 characters) individually, for the next inspection date simply use our annual inspection stickers, which you can customize with different years and label colors.Properties:Made of PE film in high-gloss white, oil- and dirt-repellent, highly resistant to heat and mechanical stress, highly adhesive - our long-lasting material!Size:80x50mmWith 4 lines</>Packaging: Roll with 500 or 1,000 labels

Consecutively numbered test tag carriers Labels with your desired text as a header and individual address field are used to permanently mark test items with a consecutive serial number. At the same time, the due date of the next test is displayed directly on the test tag carrier.ApplicationThe next inspection date is displayed by simply marking the corresponding inspection date on the tag holder. There is no need for punching pliers or clippers, all you need is a ballpoint pen or waterproof marker - with the ballpoint pen you should also apply a protective label to prevent the test date from being wiped off. This gives you additional mechanical robustness that is second to none for labels. Scope of deliveryDelivery of the 300 or 1000 test label holders.Address lineThe customer-specific address field of the inspection sticker holder consists of three lines for the contact details of the company, the inspector or the inspection department.Material The smudge and scratch-resistant film, in matt silver or high-gloss white, is also suitable for outdoor use.Test number with lettersYou also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project.Features:Consecutive serial number in plain text and barcodeIndividual header text as headline with 16 characters (e.g. tested according to DGUV V3)Customer-specific address with 3 lines and 16 characters per address lineCompatible with all standard testing devicesResistant to commercially available cleaning agents and oilPackaged on a roll with 300 or 1000 test label holdersBarcode type 128B or Code 39 (alphanumeric)Label size: 54x30mm

Consecutively numbered test tag carriers Labels with your desired text as a header and individual address field are used to permanently mark test items with a consecutive serial number. At the same time, the due date of the next test is displayed directly on the test tag carrier.ApplicationThe next inspection date is displayed by simply marking the corresponding inspection date on the tag holder. There is no need for punching pliers or clippers, all you need is a ballpoint pen or waterproof marker - with the ballpoint pen you should also apply a protective label to prevent the test date from being wiped off. This gives you additional mechanical robustness that is second to none for labels. Scope of deliveryDelivery of 300 or 1000 test label holders.Address lineThe customer-specific address field of the inspection sticker holder consists of three lines for contact details of the company, the inspector or the inspection department.Material The smudge and scratch-resistant film with a matt silver finish is also suitable for outdoor use.Test number with lettersYou also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project.Features:Consecutive serial number in plain text and barcodeIndividual header text as a heading with 20 characters (e.g. tested in accordance with DGUV V3)Customer-specific address with 3 lines and 20 characters per address lineFree field for the test badge with date rosetteCompatible with all standard testing devicesResistant to commercially available cleaning agents and oilPackaged on a roll with 300 test badge holders and 300 colored test badgesBarcode type 128B or Code 39 (alphanumeric)Label size: 68x34mm

Consecutively numbered test tag carriers Labels with your desired text as a header and individual address field are used to permanently mark test items with a consecutive serial number. At the same time, the due date of the next test is displayed directly on the test tag carrier.ApplicationThe next inspection date is displayed by simply marking the corresponding inspection date on the tag holder. There is no need for punching pliers or clippers, all you need is a ballpoint pen or waterproof marker - with the ballpoint pen you should also apply a protective label to prevent the test date from being wiped off. This gives you additional mechanical robustness that is second to none for labels. Scope of delivery300 or 1000 test label holders.Address lineThe customer-specific address field of the inspection sticker holder consists of three lines for contact details of the company, the inspector or the inspection department.Material The smudge and scratch-resistant film, in high-gloss white, is also suitable for outdoor use.Test number with lettersYou also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project.Features:Consecutive serial number in plain text and barcodeIndividual header text as a heading with 20 characters (e.g. tested in accordance with DGUV V3)Customer-specific address with 3 lines and 20 characters per address lineCompatible with all standard testing devicesResistant to commercially available cleaning agents and oilPackaged on a roll with 300 or 1000 test label holders Barcode type 128B or Code 39 (alphanumeric)Label size: 68x34mm

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: specify the test standard individually and have the inspector sign or enter their name. For the next inspection date, simply use our annual inspection stickers, which you can customize with different years and label colors.Properties:Made of PE film in high-gloss white, oil- and dirt-repellent, highly resistant to heat and mechanical stress, highly adhesive - our long-lasting material!Size:80x50mmPackaging: Roll with 500 or 1,000 labels

Colored inspection stickers with a diameter of 20mm for use with our 68x34mm inspection sticker holders. The next inspection date is indicated by simply sticking the colored inspection sticker onto the free space or sticking over the old inspection sticker.

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: define the contents of the 3 lines individually, for the next inspection date simply use our Ø 15 mm dot inspection stickers, which are provided with different years and label colors.Properties:Made of PE film in high-gloss white, oil- and dirt-repellent, highly resistant to heat and mechanical stress, highly adhesive - our long-lasting material!Size:54x30mmWith 4 lines</>Packaging: Roll with 500 or 1,000 labels

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: define the contents of the 3 lines individually, for the next inspection date simply use our Ø 20mm dot inspection stickers, which are provided with different years and label colors.Properties:Made of PE film in high-gloss white, oil- and dirt-repellent, highly resistant to heat and mechanical stress, highly adhesive - our long-lasting material!Size:68x34mmWith 4 lines</>Packaging: Roll with 500 or 1,000 labels

Consecutively numbered inspection stickers Labels with your desired text as a header and individual address field are used to permanently mark test specimens with a consecutive serial number and their coding in barcode 128B or barcode 39 (without check digit). At the same time, the due date of the next inspection is indicated by means of a colored inspection sticker. Application The next inspection date is indicated by simply sticking the colored inspection sticker onto the free field. There is no need for punching pliers or clippers as the orientation of the sticker determines the month, similar to car license plates. After the next appliance inspection, the old sticker is stuck over. Scope of delivery The 300 inspection stickers are supplied as a set with 300 inspection stickers selected when ordering. The colored inspection stickers can of course also be ordered separately and have a diameter of 15mm (inspection sticker holders 45x25mm and 54x30mm) or 20mm (inspection sticker holders 68x34mm and 80x50mm). Address line The customer-specific address field of the inspection sticker holders consists of three lines for contact details of the company, the inspector or the inspection department. Material The smudge and scratch-resistant film, in matt silver or high-gloss white, is also suitable for outdoor use. Test number with letters You also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project. Features: Consecutive serial number in plain text and barcode Individual header text with 16 characters (e.g. tested according to DGUV V3) Customer-specific address with 3 lines and 20 characters per address line Free field for the test badge with date rosette Compatible with all standard testing devices Resistant to commercially available cleaning agents and oil Packaged on a roll with 300 test badge holders and 300 colored test badges Barcode 128B or barcode 39 without check digit (alphanumeric) Label size: 45x25mm, 54.30mm, 68x34mm or 80x50mm

Consecutively numbered test badge holders Labels with your desired text as a header and individual address field are used to permanently mark test specimens with a consecutive serial number and their coding in QR code or DataMatrix code. At the same time, the due date of the next inspection is indicated by means of a colored inspection sticker. Application The next inspection date is indicated by simply sticking the colored inspection sticker onto the free field. There is no need for punching pliers or clippers as the orientation of the sticker determines the month, similar to car license plates. After the next appliance inspection, the old sticker is stuck over. Scope of delivery The 300 inspection stickers are supplied as a set with 300 inspection stickers selected when ordering. The colored inspection stickers can of course also be ordered separately and have a diameter of 15mm (inspection sticker holders 45x25mm and 54x30mm) or 20mm (inspection sticker holders 68x34mm and 80x50mm). Address line The customer-specific address field of the inspection sticker holders consists of three lines for contact details of the company, the inspector or the inspection department. Material The smudge and scratch-resistant film, in matt silver or high-gloss white, is also suitable for outdoor use. Test number with letters You also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project. Features: Consecutive serial number in plain text and barcode Individual header text with 16 characters (e.g. tested according to DGUV V3) Customer-specific address with 3 lines and 20 characters per address line Free field for the test badge with date rosette Compatible with all standard testing devices Resistant to commercially available cleaning agents and oil Packaged on a roll with 300 test badge holders and 300 colored test badges QR code or DataMatrix code (alphanumeric) Label size: 54.30mm, 68x34mm or 80x50mm

Consecutively numbered inspection stickers Labels with your desired text as a header and individual address field are used to permanently mark test specimens with a consecutive serial number and their coding in barcode 128B or barcode 39 (without check digit). At the same time, the due date of the next inspection is indicated by means of a colored inspection sticker. Application The next inspection date is indicated by simply sticking the colored inspection sticker onto the free field. There is no need for punching pliers or clippers as the orientation of the sticker determines the month, similar to car license plates. After the next appliance inspection, the old sticker is stuck over. Scope of delivery The 300 inspection stickers are supplied as a set with 300 inspection stickers selected when ordering. The colored inspection stickers can of course also be ordered separately and have a diameter of 15mm (for the inspection sticker holder 45x25mm and 54x30mm) or 20mm (for the inspection sticker holder 68x34mm). Address line The customized address field of the inspection sticker holders consists of three lines for contact details of the company, the inspector or the inspection department. Material The smudge and scratch-resistant film, in matt silver or high-gloss white, is also suitable for outdoor use. Test number with letters You also have the option of prefixing the serial number with a letter. This allows the test specimens to be grouped by cost center, room or project. Features: Consecutive serial number in plain text and barcode Individual header text as a heading with 20 characters (e.g. tested according to DGUV V3) Customer-specific address with 3 lines and 20 characters per address line Free field for the test badge with date rosette Compatible with all standard testing devices Resistant to commercially available cleaning agents and oil Packaged on a roll with 300 test badge holders and 300 colored test badges Barcode 128B or barcode 39 without check digit (alphanumeric) Label size: 45x25mm, 54x30mm or 68x34mm

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: specify the test standard individually and have the inspector sign or state their name. For the next inspection date, simply use our Ø 15 mm dot inspection stickers, which are available with different years and label colors.Properties:Made of white foil, oil and dirt repellent, high resistance to heat and mechanical stress, strong adhesion - our long-lasting material!Size: 54x30mmPackaging: Roll with 500 or 1,000 labels

Are you looking for freely inscribable inspection stickers? You'll find what you're looking for here: specify the test standard individually and have the inspector sign or enter their name. For the next inspection date, simply use our Ø 20 mm dot inspection stickers, which are available with different years and label colors.Properties:Made of PE film in high-gloss white, oil- and dirt-repellent, highly resistant to heat and mechanical stress, highly adhesive - our long-lasting material!Size:68x34mmPackaging: Roll with 500 or 1,000 labels